New generation of remote displays/scoreboard DPM-TV-P10 is intended for clearly of weight readings. Apart from basic functions of remote displays/scoreboard, the present model can programming text. It is possible to indicate any text information (up to 900 symbols).
Remote displays/Scoreboard DPM-TV-P10 is equipped by matrix LED most bright display which is in 2 times brighter as compared with regular models. Programming creeping line is supported Vietnamese language.
Generally, it is applied in weighing construction and other fields of industry and can be used for text of advertisements. Housing is metallic and it may be connected through interface RS232 or by current loop mode. On housing there are command keys for setup of data transmission.
Free software for test information programming is delivered in set with Remote displays/ scoreboard.
Automatically switch between weight display and advertising displayon DPM-TV-P10. When the weight is at ZERO for longer than 2 minutes, it automatically switches to the advertising run mode (Character string 02). Weight display value on the indicator other than ZERO will immediately display the weight.
Easily to set baud rate and font size with simple command lines. Load directly from the computer via RS232 port with ASCII codes.
Current Loop : Keli (XK3118K8A, XK3118T1, D2008FA, MK-Di01, …), Yaohua (XK3190-A9+p, XK3190-D10M, XK3190-D10Q, XK3190-DS1, …).
Remote Displays DPM-TV-P10 Pin connect
Character string Mode on DPM-TV-P10.
Character string 01: Power on.
Character string 02: Weight Mode at ZERO longer than 2 minutes.
Engineering data
| Display | Matrix, Red LED |
| Display height | 160 mm |
| Connection mode | RS232, current loop 20mА |
| Baud rate | 600, 1200, 2400, 4800, 9600bps |
| Power supply | АС 110-220V/50 Hz |
| Dimensions | 660х200х65 mm (LхHхW) |
| Operating temperature range | -20 ~ 60 ºС |
| Compatible protocols | CAS, EXCELL, METTLER TOLEDO, FLINTEC, FINE, RINSTRUM, VISHAY, OHAUS, KELI, YAOHUA, MKCELLS, … |
| In a set | Connection cable – 10m Free software for programming |
Prefix and suffix structure to configure DPM-TV-P10
With default
$0ASETB 2400$0D && set baud 2400, baud 600 is current loop
$0ASETF 1$0D && set FUN 1
$0ASETS 3$0D && set character size 3
$0ASETL 1$0D && set level light 1
$0ASETN1 COMPANY NAME 1$0D
$0ASETN2 COMPANY NAME 2$0DWith FUN
FUN1: $0A…$0D
FUN2: $02…$0D
FUN3: $02…$03
FUN4: $3D…$3D
FUN5: $0D…$0D
FUN6: Auto
Command line structure to configure DPM-TV-P10
Character string 01: advertising text “CÔNG TY CỔ PHẦN ĐẦU TƯ XÂY DỰNG B.M.T“
$0ASETN1 COONG TY COOR PHAAFN DDAAF TUW XAAY DUWJNG B.M.T $0D
Character string 02: advertising text “Electronic Weighing Scales KALA www.KalaScale.com Hotline: 0988 708 308“
$0ASETN2 Caan ddieejn tuwr KALA www.KalaSScale.com Hotline: 0988 708 308 $0D
Set Baud rate: 2400
$0ASETB 2400$0D
Set font size (0~3): 3.
$0ASETF 3$0D
