Weight Indicator Keli XK3118T1

Weighing indicator XK3118T1 adopts high precision A/D conversion technology, with division switch function and AC/DC power supply, widely applied in electronic platform scale, mechanic -electronic scale and so on alike static weighing system equipped with 1 load cell.
XK3118T1 is widely applied in static weighing system equipped with 1~4 load cell.

Technical parameter

Class: OIML Class III, N=5000.

A/D conversion method: ∑-Δ.

A/D conversion speed: 10 times/sec.

Input signal range: -16 mV ~ 18 mV.

Max. connection number of load cell: 1 at 350 ohm ; 4 at 350 ohm.

Load cell connection mode: 6 wire, auto compensation for distance ≤ 50 meters.

Verified counts: 3.000.


Max.internal resolution: 600.000.

Display: 6 bits LED, 6 status indications.

KG/LB switch function.

Scoreboard interface (Standard): Serially sending by 20mA current loop with baud rate 600, transmission distance ≤ 2.000 meters.

Animal weighing function.

Power supply: AC 187~242V,49~51Hz; DC 6V/10Ah battery.

Connect Load cell with Jack Load cell DB9 (9 pin) on XK3118T1

#PIN 1 2 5 6 7 8 9

Shorted #1 & #2, #6 & #7 when Load cell 4 core.

Mô tả chân kết nối tín hiệu RS232/Dòng lặp

Connect RS232/Current Loop on XK3118T1


Connection with Load Cell

Connection with Load Cell, Short connect PIN 1 and 2, PIN 6 and 7 when connected a load cell with 4 wire cable


XK3118T1 Weight Indicator Manual

Leave a Reply